Olympus E-450 Manuel d'utilisateur Page 111

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 147
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 110
Shooting tips and maintenance
12
111
EN
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring
well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the
camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor and viewfinder:
Wipe gently with a soft cloth.
Lens, mirror and focusing screen:
Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the lens,
wipe gently with a lens cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store the
camera in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and when
starting and stopping live view. The dust reduction function operates at the same time as the
pixel mapping, which checks the image pickup device and image processing circuitry. Since
dust reduction is activated every time the camera’s power is turned on, the camera should be
held upright for the dust reduction function to be effective. The SSWF indicator blinks while dust
reduction is working.
g
“SSWF indicator” (P. 14)
No indication SETTINGS CHANGED
The printer’s paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
Do not manipulate the
printer while making
settings on the camera.
No indication
PRINT ERROR
There is a problem with
the printer and/or
camera.
Turn off camera and
printer. Check the
printer and remedy any
problems before turning
the power on again.
No indication
CANNOT PRINT
Pictures recorded on
other cameras may not
be printed on this
camera.
Use a personal
computer to print.
Camera maintenance
Viewfinder indications Monitor indication Possible cause Corrective action
E-450_MASTER.fm Seite 111 Donnerstag, 16. April 2009 10:40 10
Vue de la page 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 146 147

Commentaires sur ces manuels

Pas de commentaire