Olympus PT-045 Manuel d'utilisateur télécharger pdf (Page 18)

EN 18

Seal the Case

1 Close the rear lid of the Case gently.

2 Turn the open/close dial clockwise.

• The Case is sealed when the dial is turned 180 degrees.

Check the operation of the loaded camera

After sealing the Case, check that the camera operations normally.

1 Push the ON/OFF button on the Case and confirm that the camera

turns ON/OFF.

2 Turn the mode dial on the Case and confirm that the camera mode

switches properly.

• Check if the correct mode is being switched from the LCD monitor.

3 Press the shutter lever on the Case and confirm that the camera

shutter releases.

• Also operate other control buttons on the Case and confirm that the

camera functions properly.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This

will cause water leakage.

• Close the rear lid of the Case so that the lens cap or LCD hood strap

doesn’t catch. If it catches, water leaks may result.

PT-045_EN.book Page 18 Monday, December 8, 2008 11:50 AM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Pas de commentaire

Olympus PT-045 Manuel d'utilisateur Page 18