Olympus C-2 Guide de démarrage rapide télécharger pdf

3 Shooting/Playback

Taking still pictures

Open the lens barrier.

Slide the lens barrier open until it clicks.

The flash pops up and the lens extends.

Position the AF target mark over the

subject in the viewfinder.

Press the shutter button gently (halfway).

The green lamp on the right of the viewfinder

lights up when the focus and exposure are

locked. At this time the sound of the focusing

mechanism can be heard from inside the

camera, but no picture is being taken.

Press the shutter button all the way (fully).

The camera takes the picture.

Playing back still pictures

Press with the lens barrier closed.

The monitor turns on and displays the last picture taken.

Press

to display the previous/next picture.

Press to cancel playback.

The monitor and camera

turn off.

Recording movies

Press with the lens barrier open.

The top menu in the shooting mode is displayed.

Press

to select DRIVE.

Press to select , then press

Record the movie while observing your

subject on the monitor.

Press the shutter button fully to start recording.

Press the shutter button fully again to stop

recording.

Playing back movies

Press with the lens barrier closed.

The monitor turns on.

Press

to display the desired picture with a indicator, then

press .

The top menu is displayed.

Press

to select MOVIE PLAYBACK.

The movie is played back after the orange lamp on the right of the viewfinder

blinks and the movie data is downloaded to the camera. When the movie

reaches the end, the display returns automatically to the beginning of the movie.

Press to display the MOVIE

PLAYBACK menu. Then select the

desired operation and press .

PLAYBACK: Plays back the entire

movie again.

FRAME BY FRAME: Plays back the movie

manually one frame at a

time.

EXIT: Leaves the movie playback mode.

4 Erasing pictures

Single-frame erase

Press with the lens barrier closed.

The monitor turns on.

Press

to select the picture you want to erase.

Press .

The top menu is displayed.

Press

to select

ERASE.

Press to select YES, then

press .

The picture is erased and the menu is closed.

5 Protecting pictures (Protect)

You are recommended to protect important pictures to avoid accidentally erasing

them.

Press with the lens barrier closed.

The monitor turns on.

Press

to select the picture you want to protect.

Press , then press

The mode menu is displayed.

Press to select the PLAY tab, then press .

Press to select , then

press .

Press to select ON.

The selected picture is protected.

To close the menu, press twice.

AF target mark

Orange lamp

Green

lamp

Jumps to the picture 10 frames behind.

Displays the

next picture.

Jumps to the picture 10 frames ahead.

Displays the

previous picture.

• Erasure is not possible if the picture you want to erase is protected or a

write-protect seal is attached to the card. Before erasing, unprotect the

picture or remove the write-protect seal from the card.

• Once erased, pictures cannot be restored. Check each picture before

erasing to avoid accidentally erasing pictures you want to keep.

• The indicator is displayed at the top right of the protected picture.

• Protection on each picture remains even when the camera is turned off.

• Protected pictures cannot be erased by the single-frame/all-frame erase

function, but they can be all erased with the format function.

• Protection cannot be applied to pictures stored on a card with a write-

protect seal.

We’ve included this convenient Quick start guide to show you basic functions and

techniques that will help you quickly master your new camera. For more detailed

descriptions of procedures, as well as for additional information on more sophisticated

features not covered here, please refer to the printed “Basic Manual”, or the primary

“Reference Manual” on the CD-ROM.

Package contents

1 Getting started

Attaching the strap

Thread the short end of the strap through the

strap eyelet.

Thread the long end of the strap through the

loop that has already gone through the

eyelet.

Pull the strap tight, making sure that it is

securely fastened and does not come loose.

Loading the batteries

Make sure that:

Slide the battery compartment

cover in the direction of (the

direction indicated by the

mark on the cover), and lift it up in

the direction of .

Insert the batteries, making sure

that they are correctly oriented as

shown in the illustration.

Close the battery compartment cover in the

direction of . While pressing the mark,

slide the cover in the direction of .

If the battery compartment cover will not close easily, do

not force it. Try pressing the

mark with both hands.

Inserting the card (SmartMedia)

Make sure that:

Open the card cover.

Insert the card as far as it will go in the

direction shown in the illustration.

There is an arrow inside the card cover, indicating

the direction in which the card should be inserted.

Close the card cover securely until it clicks





Removing the card.

Hold the card with your fingertips and pull it out in the

direction of the arrow.

2 Turning the power on/off

When shooting pictures

When playing back pictures

C-2 Zoom

C-2 ZoomC-2 Zoom

C-2 Zoom

D-520 ZOOM

D-520 ZOOMD-520 ZOOM

D-520 ZOOM

C-220 ZOOM

C-220 ZOOMC-220 ZOOM

C-220 ZOOM

Quick start guide

DIGITAL CAMERA

 Camera

 Strap

 AA (R6) alkaline batteries (2 pieces)

 Video cable

 USB cable

 Basic manual

; Quick start guide

 Software installation guide (included in

the CD-ROM package)

 CD-ROM with Windows 98 USB driver

software, Reference manual, and more.

 Warranty card/Registration card (not

provided in some areas)

 Safety Precautions (booklet)

 SmartMedia

 Static-free case

 Index labels (2 pieces)

 Write-protect adhesive seals (4 pieces)

 SmartMedia instructions

Printed in Japan

VT351301

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

24/7 online automated help: http://support.olympusamerica.com/

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery: Wendenstraße 14-18, 20097 Hamburg, Germany

Tel. 040-237730

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

http://www.olympus.com/

Strap

eyelet

The lens barrier

is closed.

The lamp on the right

of the viewfinder is off.

The monitor

is off.

Battery

insertion

direction

mark

When using a

lithium battery

pack

When using AA

(R6) batteries

Never open the card cover, or remove the card or the batteries while the

camera is turned on. Doing so could destroy all data on the card. Destroyed

data cannot be restored.

The lens barrier

is closed.

The lamp on the right of

the viewfinder is off.

The monitor is off.

Card insertion

direction mark

To save battery power, the camera automatically enters the sleep mode

after about 3 minutes of non-operation. If the monitor is on, it will

automatically turn off. The camera activates again as soon as you lightly

press the shutter button or zoom lever. Whenever possible, turn the camera

off when you do not intend to take any pictures for a while.

Power on Power off

Power on:

Open the lens barrier.

The camera turns on in the

shooting mode. The lens

extends and the flash pops up.

If the lens does not extend, the

lens barrier is not fully open.

Open the lens barrier until it

clicks.

Power off:

Close the lens barrier slightly

until it just touches the lens

barrier.

Wait until the lens is fully

retracted, then close the lens

barrier completely.

The camera turns off. (The

monitor also turns off.)

Press the flash down manually

until it locks in place.

Power ON Power OFF

Power on:

Press the (monitor) button

with the lens barrier closed.

The camera turns on in the

playback mode. The monitor

turns on.

Power off:

Press the (monitor)

button.

The camera turns off (the

monitor turns off).

With the lens

barrier closed

1 2

Quick start guide 1
Shortcut menus 2

Résumé du contenu

Page 1 - Quick start guide

3 Shooting/PlaybackTaking still pictures1111Open the lens barrier.Slide the lens barrier open until it clicks.The flash pops up and the lens extends.2

Page 2 - Shortcut menus

How to use the menus Mode menusMode menu functions are categorized into 4 tabs. Use to select a tab and display the respective functions.Shooting mo

Commentaires sur ces manuels

Pas de commentaire

Olympus C-2 Guide de démarrage rapide

Naviguer en ligne ou télécharger Guide de démarrage rapide pour Caméscopes Olympus C-2. Olympus C-2 Quick Start Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Olympus C-2