Olympus Tough TG-310 Manuel d'utilisateur télécharger pdf (Page 53)

For information on using the menus, see “Setup menu” (p. 6).

Type D (CB-HD1)

Type C

3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”

For details on changing the input source of the TV, refer to the TV’s instruction manual.

4 Turn on the camera, and use HI to select the image for playback.

Depending on the TV’s settings, the displayed images and information may become cropped.

To operate images with the TV remote control

1 Set [HDMI Control] to [On], and turn off the camera.

2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 52)

3 First turn on the TV, and then turn on the camera.

Operate by following the operation guide that is displayed on the TV.

With some TVs, operations cannot be performed with the TV remote control even though the operation guide is

displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the

camera.

●

Saving battery power between shots

[Power Save]

s (Settings 2) X Power Save

Submenu 2 Application

Off Cancels [Power Save].

When the camera is not being used

for approx. 10 seconds, the monitor

automatically turns off to save

battery power.

To resume standby mode

Press any button.

Changing the display language [

]

s (Settings 2) X l

Submenu 2 Application

Languages

The language for the menus and

error messages displayed on the

monitor is selected.

Setting the date and time [

]

t (Settings 3) X X

“Date, time, time zone, and language” (p. 17).

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 82 83

Pas de commentaire

Olympus Tough TG-310 Manuel d'utilisateur Page 53