Olympus E-450 Manuel d'utilisateur télécharger pdf (Page 105)

Shooting tips and maintenance

105

The picture is too grainy

Increasing the ISO sensitivity

•

When you increase the ISO setting, noise, which appears as spots of unwanted color or unevenness

in the color, can be introduced and give the picture a grainy appearance. This camera is equipped

with a function to allow shooting at high sensitivity while suppressing noise; however, increasing the

ISO sensitivity creates grainier pictures than when using a lower sensitivity.

“ISO sensitivity setting” (P. 50)

Image taken appears whitish

This may occur when the picture is taken in backlight or semi-backlight conditions. This is due

to a phenomenon called flare or ghosting. As far as possible, consider a composition where

strong light source is not taken in the picture. Flare may occur even when a light source is not

present in the picture. Use a lens hood to shade the lens from the light source. If a lens hood

does not have effect, use your hand to shade the lens from the light.

“Interchangeable lenses” (P. 115)

Taking pictures with the correct color

The reason why there are differences between the colors in a picture and the actual colors

taken and the actual color is the light source illuminating the subject.

[WB]

is the function that

allows the camera to determine the correct colors. Normally, the

[AUTO]

setting provides the

optimal white balance, but depending on the subject, it may be better to experiment with

changing the

[WB]

setting.

•

When the subject is in the shade on a sunny day

•

When the subject is illuminated by both natural light and indoor lighting, such as when near a window

•

When there is no white in the frame

g“Selecting the white balance” (P. 60)

Taking pictures of a white beach or snow scene

In normal cases, white subjects such as snow will appear darker than usual when the picture is

taken. There are several ways to capture the whiteness.

•

Adjust the exposure compensation toward

[+]

“Exposure compensation” (P. 48)

•

Use

[

]

(BEACH & SNOW) in

(Scene mode) to take the picture. It is most suitable for taking

pictures of the sea in a sunny day or snow-capped mountains.

“Mode dial” (P. 4)

•

Use

[

HI]

(Spot metering highlight control).

Press the shutter button halfway at the center of the viewfinder where you wish to highlight the

whiteness. The metered part at the center will be set to appear whiter. g“Changing the metering

mode” (P. 47)

•

Use the AE bracketing function to take the picture.

If you do not know the amount of exposure compensation, try using AE bracketing. The

compensation value changes a little every time you press the shutter button. If you set a larger

exposure compensation, you can change the compensation value either upwards or downwards

based on that value and shoot the picture. g“AE bracketing” (P. 49)

E-450_MASTER.fm Seite 105 Donnerstag, 16. April 2009 10:40 10

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 146 147

Commentaires sur ces manuels

Pas de commentaire

Olympus E-450 Manuel d'utilisateur Page 105

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Olympus E-450