Olympus DS-2200 Manuel d'utilisateur télécharger pdf (Page 60)

Connecting to Your PC

Connecting to your PC using the cradle

Place the recorder on the cradle

Insert end A of the USB cable to your PC's

USB port or USB hub.

Connect the end b of the USB cable to the

cradle.

Make sure that the recorder is in the Stop

mode, and place it in the cradle.

1 Set the recorder vertically.

2 While pushing down the top of the recorder, set

the recorder on the cradle. In this case, make sure

that concavity on the rear of the recorder fits

convexity of PC.

“REMOTE” is displayed on recorder if the USB cable

is connected.

Remove the recorder from the cradle

Make sure that the recorder's record/play

indicator lamp isn't flashing, and remove the

recorder from the cradle.

Hold the cradle with your hand, and raise the recorder

from the top end to remove it from the hook, as shown

in the illustration.

.....................................................................................

Notes

• Do not touch the connection point on the front of the

cradle (at the low end), as that may cause bad

connection.

• The cradle does not have the recharging function.

Connecting to Your PC

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

Pas de commentaire

Olympus DS-2200 Manuel d'utilisateur Page 60